With the NRS Swivel and Plates you can turn any NRS Padded Raft Seat into a swivel seat! Bolt the plates to your seat, then bolt the swivel base to your seat bar or the Universal Seat Mount.
- The unit consists of a swivel base that allows the seat to rotate 360 degrees, and two hot-forged aluminum plates that are bolted to it.
- The two aluminum plates have holes in the 7 x 7.5 bolt pattern for the NRS Low-Back and High-Back Seats. Use the bolts you have with your seat to attach it to the aluminum plates.
- All seat plates on NRS Seat Bars and Angler Seat Bars made in the last several years will have bolt holes in the 5.25 x 5.25 pattern for the swivel.
- If you have an older seat bar that doesn’t have those holes, just drill four 1/4 holes in that 5.25 x 5.25 pattern.
- The unit comes with mounting hardware: 4 each 1/4-20 x 1 bolts and lock nuts, and 8 flat washers.
- The Universal Seat Mount, Item # 94015.01, has both the 7 x 7.5 and 5.25 x 5.25 hole patterns. It can be used for mounting your swivel seat anywhere on the 1 5/8 frame pipe.
Dimensions: |
- Seat plate measurements – 8.25 x 9.25
- Swivel plate measurements – 6.25 x 6.25
- Seat plate bolt hole pattern – 7 x 7.5
- Swivel plate bolt hole pattern – 5.25 x 5.25
|
Category: |
|
Weight: |
3.125lbs. |
A |
B |
C |
D |
E |
F |
9 1/4 |
8 1/4 |
7 1/2 |
7 |
6 3/8 |
4 3/4 – 5 1/2 |
Reviews
There are no reviews yet.